SikaFlex-529 AT - Hybrid Waterproofing - Sika
Sikaflex-529 AT is a single-component, spray-applied, moisture-curing adhesive sealant.
Take advantage of quantity discounts.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
6 | 5 % | €17.68 |
12 | 8 % | €17.12 |
SIK 171196
7612894700893
SikaFlex-529 AT - Hybrid Waterproofing - Sika
Sikaflex-529 AT is an adhesive putty , mono-component, applicable by spraying, which hardens under the action of humidity.
Sikaflex-529 AT is used to seal joints having a factory -like appearance and surface structure in body construction.
Sikaflex-529 AT has good adhesion to most common substrates in the field of body construction such as primers and paints for metals , metals and plastics.
Surfaces coated with Sikaflex-529 AT have increased resistance , eg against stone chips.
Features
- Advanced hybrid technology
- Good adhesion to a wide range of different substrates without primer
- Fast hardening
- Excellent processing properties without spray mist and with good rheological properties
- Replicates the original factory finish
- Sprayable, but also applicable as a bead or by brush
- Can be painted over with water-based paints, both wet-on-wet and after skinning
- Good mechanical and acoustic insulation properties
- Aging resistant
- Low odor
- Free of isocyanates and solvents
- Free of silicones and PVC
Application areas
- Sikaflex-529 AT is a flexible sprayable sealant for assemblies and lap joints in body repair and construction.
- Where Sikaflex-529 AT is applied, the resistance to aggregates and other knocks in the bodywork increases.
- The Sikaflex-529 AT has good adhesion to all materials usually used in bodywork companies such as primers for metals and primers, metals and varnished synthetic materials.
- This product is only suitable for use by experienced professionals.
Always carry out preliminary tests on common substrates and under local conditions to establish the compatibility of the sealant and the material.
Application
- Sikaflex-529 AT can be applied at temperatures between 5°C and 40°C.
Changes in responsiveness and application properties must be taken into account. - The optimum temperature for substrate and filler is between 15°C and 25°C.
- Apply Sikaflex-529 AT using an appropriate cartridge/bag gun.
- It is best to coat Sikaflex-529 AT during the skin formation time.
- If the paint requires a baking process (above 80°C), best results are obtained when the filler has fully cured beforehand.
- The compatibility of paints must be checked by preliminary tests under production conditions.
- As the elasticity of paint is lower than that of putty, paint cracks may occur in the joint area.
Conditioning
- 290ml cartridge
- 300ml bag
SIK 171196
6 Items
Data sheet
- Signal word
- As of Q3 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard statements
- As of Q3 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard pictogram
Specific References
- EAN13
- 7612894700893