Hydroblack - Mass water repellent - Zep Industries

Hydroblack - Mass water repellent - Zep Industries

Black mass water repellent for waterproofing coatings and mortars mixes easily with the mixing water and gives a uniform color and consistency to the mix.

Properties :

• Hydro Black exceeds specifications in capillary absorption tests described by ISO-DIS-11014, NF-P18354, AFNOR 01102, CEE directive 91-155.
• Dispensable, Hydro Black mixes easily with the mixing water and gives a uniform color and consistency to the mix.
• Black, Hydro Black tints the coating in the mass and highlights the treatment.
• Plasticizer, Hydro Black allows quick and easy application of the coating.
• Hydro Black can be painted over with most paints or covered with a thick plastic coating for building use.
• Hydro Black entrains air and expands coatings by 10 to 12%.
• 1 dose of 2 liters for 50 kg of cement.

Manual :

1. Shake the dose of Hydro Black vigorously, add it to ¾ of the water needed for the mixture, as well as the rinsing water from the can which contained Hydro Black until it is clean, empty this solution into the cement mixer.
2. Then introduce the various constituents, sand, cement, mix well, and finally adjust the water until a homogeneous paste is obtained.
3. The application will be done in the traditional way either by projection, using a sandblaster, or manually. The coatings will be floated, tightened and smoothed, backfilling will be done within 48 hours.
4. The cement dosage and the making of the coating body are carried out according to the rules of the art.
5. Advice :

• Mix the dose well before use.
• Hydro Black is frost resistant down to -10°C.
• In case of freezing, bring to positive temperature and homogenize before use.
• The material is easily cleaned by rinsing with water; do not let it dry.

Conditioning :

2 L.