Anchor - Professional chemical anchor - Tec7

Anchor - Professional chemical anchor - Tec7

Professional chemical anchor for fixing and mounting in most construction materials, such as concrete, solid and hollow stone, cellular concrete, etc.

Features :

• 2-component chemical anchor based on styrene-free vinyl ester resins in a standard cartridge, applicable with a Tec Gun.
• The mixture of the two components is obtained using static mixing tips.
• The unique combination of rapid curing, wide application margins and physical properties make it a unique chemical anchor in the professional market for effective fixing and joining in all construction materials, such as concrete, stone solid and hollow, cellular concrete,... .
• Withstands high forces and can be used on wet surfaces, even underwater, at temperatures from -5°C to +40°C.
• After rapid hardening, Anchor is more resistant than the substrate: without shrinkage, therefore reliable, and without expansion, therefore low in tension.
• Safety, respect for nature and conviviality.
• Can also be used indoors: styrene free, phthalate free, low odor.
• With its exceptional UV and chemical resistance, even against chlorinated and salt water, Anchor can be used in aggressive situations.
• Anchor is dimensionally stable and can also be used overhead in ceiling holes.
• Very long shelf life, even when opened and used.

Application areas :

1. Fixing and assembling constructions in all building materials, including concrete, even cracked, lightweight concrete, foam concrete, solid masonry, solid and hollow brick, natural stone (note: test stone for discoloration natural).
2. Anchoring, for example, railings, sanitary ware, cable and pipe ducts, metal profiles, reinforcing iron, internal threaded rods, threaded rods, facade plates, natural stones,. ..
3. Can also be used as a repair mortar for concrete: as a filling of unnecessary drill holes.
4. Can be used for anchors with limited space between pin and wall due to its hardening without expansion.

Technical specifications:

• Product basis: styrene- and phthalate-free vinyl resins.
• Grey color. Odor: almost odorless.
• Cartridge application temperature: between +5°C and +20°C.
• Application temperature: between -10°C and +40°C.
• Temperature resistance after complete curing: -40°C to +80°C, with peaks up to +120°C.
• Density: 1.66 kg/dm³.
• Pressure resistance: 103 N/mm².
• Bending strength: 37 N/mm².
• Dynamic modulus of elasticity: 1200 N/mm².
• Chemical resistance: high.
• Shelf life: 18 months, dry, cool and protected from frost.

Conditioning :

280 ml cartridge.