LÖSEFIX - Solvent-based cleaner for oil and wax stains - Lithofin

LÖSEFIX - Solvent-based cleaner for oil and wax stains - Lithofin

This ready-to-use cleaner is composed of a highly effective combination of active solvents reinforced with cleaning agents .

To make them washable with water, Lithofin LÖSEFIX dissolves organic dirt such as wax, oil, grease, tar, fresh paint, wood varnishes , layers of vitrification, hardened residues of cleaning products. maintenance, etc.

Technical specifications :

• Density: approx. 0.85 g/cm³
• Appearance: fluid, clear
• Smell: aromatic, orange zest
• Flash point: approx. 46°C (cc)
• Water solubility: emulsifiable

Application domain :

This product is applicable both indoors and outdoors on all solvent-resistant substrates such as natural stone, artificial stone, ceramics, terracotta, or even concrete.

Manual :

1. Apply and distribute Lithofin LÖSEFIX undiluted on the dry surface, leave to act for 5 to 20 minutes and brush occasionally.
2. If all the dirt is dissolved, add a little water, brush and evacuate.
3. For a large surface, use a rubber squeegee to pick up the product or a wet vacuum cleaner.
4. Always rinse thoroughly with clean water.
5. In case of stubborn dirt, repeat the procedure on the dried surface

Attention: the surface must not have a temperature higher than 25°C. Switch off the underfloor heating.

Do not use on materials not resistant to solvents such as rubber, paint, fresh varnish, linoleum, bitumen, certain composite materials.

Rinse off spills immediately. Test the product beforehand on a small surface.

Note: For deep oil stains in artificial or natural stone, we recommend Lithofin OIL-EX .

Yield :

• approx. 7 to 15 m²/L depending on the type of soiling and its extent.