OIL-EX - Solvent-based cleaner for encrusted oil stains - Lithofin

OIL-EX - Solvent-based cleaner for encrusted oil stains - Lithofin

Lithofin OIL-EX is a ready-to-use paste in the form of a gel based on a compound of solvents and highly absorbent solids.

It dissolves and absorbs oily stains and soils , oil and grease.

Thanks to its pasty form, the agents contained in the product can act for a long time, which leads to a satisfactory cleaning result, even in the case of deeply embedded impurities .

Technical specifications :

• Density: approx. 0.8g/cm³
• Flash point: > 27°C
• Appearance: opaque, gel-paste
• Smell: aromatic

Application domain :

For removing oil stains and similar impurities from natural stone surfaces, chipboard slabs, cement screeds and similar absorbent surfaces.

The ideal product for kitchen worktops, but also for driveways and other surfaces.

Manual :

1. Apply or impregnate a thick layer of Lithofin OIL-EX on the dry surface using the plastic spatula. The thickness of the layer should be about 2 mm.
2. Leave to dry for approximately 12 hours; cover the surface if necessary to avoid too rapid drying.
3. After complete drying (a state you will recognize by the paste which has turned into a layer of white powder) sweep or wipe off the residual powder.
4. Remove deeper impurities with a second or third cleanse.

Warning: do not apply at a temperature below 10°C or above 25°C.

Do not use on varnished, plated or solvent-sensitive surfaces, or on plastic surfaces. If in doubt, test on an inconspicuous surface.

Note: In the case of use on natural stones of dark color, it is possible that remnants of powder will be visible in the pores of the stone.

These remains disappear on their own over time or can be removed with the Lithofin MN Multi-Nettoyant basic cleaner.

Yield :

• approx. 0.5m²/kg when applying a layer of 2 mm.