Helix Clips - Levelling spacers - Levelit

Helix Clips - Levelling spacers - Levelit

Spacer clips allow you to align the entire floor and ensuring perfect spacing of joints between tiles.
The suitable length of the clips allows you to lay both thin and thick tiles with a thickness of 3 to 17 mm.

The clip is designed in such a way that it always breaks just above the foot.
The exclusive use of new and pure plastic granules ensures very stable quality.

Facility :

Step 1: Slide the clips under the tile
After applying the glue, the clips are slipped under the tile. You place one or more clips per side depending on the format of the tile. Position the tile by tapping it with a mallet.

• Lay the adjacent tile after placing the spacers.
• Depending on the dimensions of the tile, it may be necessary to use several spacers on each side.
• The use of two spacers per side is recommended for tiles of approximately 20 cm.

Step 2: Screw the caps onto the clips

Hand screw the caps onto the clips that were slipped under the tiles.

Step 3: Turn the cap all the way

Turn the cap all the way and tighten it to level the tile.

Step 4: Remove the clip

After tightening the cap, respect a drying time of 24 hours!

Once the tile adhesive has set, you can remove the upper parts of the clips and the caps.
To do this, break the clips with a mallet or with your foot by tapping in the direction of the joint.

Step 5: Unscrew the cap from the broken clip.

The caps can be reused after unscrewing them from the clip.

Usage tips

The number of clips and spacers needed depends on the size of the tiles.
The quantity of Levelit depends on the size of the tile (A x B) and can be deduced by consulting the table provided.

Possible joint width:

• 1.5mm
• 2mm
• 3mm
• 4mm

Conditioning :

100 and 250 pieces