Helix Caps - Levelling wedges - Levelit

Helix Caps - Levelling wedges - Levelit

Spacer caps put pressure on the tile being leveled when tightened.
Thanks to a specific design, it is easy to apply uniform pressure at all times, achieving perfect and even leveling.

The caps can be combined with all the clips in our range and are available in bags of 100 and buckets of 250.

• The specific design ensures perfectly uniform pressure.
• The ergonomic shape of the caps allows them to be tightened easily.
• Thanks to their robust material, these are reusable.

Facility:

Step 1: Slide the clips under the tile

After applying the glue, the clips are slipped under the tile.
You place one or more clips per side depending on the format of the tile.
Position the tile by tapping it with a mallet.

• Lay the adjacent tile after placing the spacers.
• Depending on the dimensions of the tile, it may be necessary to use several spacers on each side.
• The use of two spacers per side is recommended for tiles of approximately 20 cm.

Step 2: Screw the caps onto the clips

Hand screw the caps onto the clips that were slipped under the tiles.

Step 3: Turn the cap all the way

Turn the cap all the way and tighten it to level the tile.

Step 4: Remove the clip

After tightening the cap, respect a drying time of 24 hours!

Once the tile adhesive has set, you can remove the upper parts of the clips and the caps.
To do this, break the clips with a mallet or with your foot by tapping in the direction of the joint.

Step 5: Unscrew the cap from the broken clip.

The caps can be reused after unscrewing them from the clip.

Usage tips

The number of clips and spacers needed depends on the size of the tiles.
The quantity of Levelit depends on the size of the tile (A x B) and can be deduced by consulting the table provided.

Conditioning:

100 and 250 pieces