TECHNISIL HYDRO
Water repellent surface for porous media
Technisil Hydro is a universal water repellent to water for colourless treatments of roofs. It is odorless, non-flammable, and non-harmful, as well for the environment and for the user.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
3 | 10 % | €35.08 |
TECHNISIL HYDRO 5L
9145342705617
Water repellent surface for porous media
Sorry, this product is no longer currently for sale on the site www.pierreetsol.com, because society TECHNICHEM practice prices higher in France than in Belgium, that Pierre and ground is based in Belgium, it would have exclusive products which we have no access to the parts while it does not apply to online sales,... TECHNICHEM refuses to sell us their production while we have never had commercial and accounting problems.
Do not hesitate to contact us for other products, and to assist the free movement of goods and free trade, do not hesitate to inform us if you find these products for sale on other sites internet or traders. We are especially grateful.
We also poposons currently a similar range with: Guard industry
Description:
- TECHNISIL HYDRO is liquid, ready to use and intended for the waterproofing of different porous vertical and horizontal in the construction (concrete, masonry, coated, natural stone or reconstituted,...);
- TECHNISIL HYDRO is a colourless surface waterproof, high performance, it consists of a MicroEmulsion of Oligomeric siloxane type methyl-ethoxy-octyl and addictive Catalysis and bridging prepolymers;
- TECHNISIL HYDRO contains no solvent, is non-flammable, odorless, and can be applied to support wet or dry, alkaline and fresh seals.
Performance:
- TECHNISIL HYDRO has been tested by the scientific and technical center of the Construction; Report N ° H.D. 340/133-1055;
- Reports of trials on water absorption, scattering the steam and water on the accelerated aging.
Applications - Properties of materials:
- Waterproof protection and repellent of walls and facades of buildings private, public, structures (tunnels, bridges);
- High buildings and soil protection against pollution;
- Protection masks, anti-affiche, anti-cryptogamique, anti-fouling;
- Protection against bad weather, smog, acid rain and pollutants;
- Reduced the damage due to frost;
- Limitthe formation of blooms by migration of water;
- Limit the penetration of water into the Interior;
- The reduction of water absorption allows the material to keep its thermal insulation properties;
- Easier maintenance of the support by the character self-cleaning of the repellent;
- …;
Properties:
- System non-film forming;
- Does not change the appearance of the support;
- Breathable material - permeable to water vapour;
- Free from solvent, odourless, non-toxic and non-flammable;
- Excellent aging, not yellowing;
- Sustainable treatment at the time;
- Slows down the formation of micro-organism (mosses, lichens,...);
- Can be applied on damp or dry support, as well as fresh joints;
Implementation and precautions:
Implementation:
- The media must be healthy, clean, dusted and fat;
- Disinfect the bracket, eliminate mosses, algae and lichens using a fungicide type TECHNICIDE + (permission 1904 B No.);
- Clean up the frayed joints, sealing the cracks;
- Application to saturation, by brush, roller or spray (TECHNISPRAY 10) one to two successive layers (the second layer is sprayed onto the first still wet);
- Consumption: between 200 and 1500 ml/m² in total, depending on the porosity of the media;
- Determination of consumption and the efficiency of the treatment by the method with pipe glass;
- Support the TECHNISIL HYDRO-treated can be exposed to rain after +/-2 hours.
Notes and precautions:
- The temperature of the medium can never be less than 5 ° C;
- In all cases, the chassis and the glass must be protected, accidental stains should be immediately cleaned using water;
- TECHNISIL HYDRO cannot be applied on non-porous materials;
- Pre-test situ always advised;
- In the case of presence of salts in surface (saltpeter), we recommend to neutralize these salts (to the TECHNIROC) prior to application of TECHNISIL HYDRO.
Technical characteristics:
- Density: 1.05;
- Aspect: White liquid;
- Active ingredients: 10%;
- Flash point: non-flammable; (contains no solvents)
- Ph: 10;
- Odor: none;
- Viscosity: 1000-3000 cPs (at 25 ° C);
- Modification of surface tension: 12 20 mN/m.
- Wetting angle: greater than 60 ° depending on Method used ASTM D5946;
- Water vapour permeability: coefficient µ INF. 10;
- Water resistance according to yourt method glass Pipe: 100%;
- Maximum efficiency: after 7 days.
- Principle of action: hydrophobic;
- Bridging of cracks: contains a polyolefin resin that ponte cracks of 300 microns.
Packaging and storage:
Keep frost-free - Stockable 1 year