Imperplast eco - Water repellent for exterior walls and facades - PTB Compaktuna

Imperplast eco - Water repellent for exterior walls and facades - PTB Compaktuna

Imperplast eco is a water-based product and will be applied to porous and vertical walls.

Imperplast eco is used as protection for buildings , construction elements and materials.
The product will make the surface water-repellent , self-cleaning and water- resistant . Depending on the type of surface, the appearance of the surface may change color slightly.

Features :

• Will make the surface water-repellent, self-cleaning and water-resistant. Depending on the type of surface, the appearance of the surface may change color slightly. In general, a more intense and deeper color is obtained.
• Thus protects against driving rain, snow, infiltration, efflorescence, crumbling and also improves the thermal insulation of walls.
• Does not form a film, but it creates, in the depth of the treated material, an extremely fine network of great durability.
  This fine hydrophobic structure has a ventilation quality by which the breathing of the construction is preserved.

Manual :

Support

1. The surface to be treated must be sound, firm, dust-free and clean.
2. Cracks or cracks must be repaired beforehand and the mortar or filling material must be dry.
3. The application should be made more in dry weather, if possible, during the sunny and warm season or during midday hours.
   In rainy or foggy weather such work is not recommended.

Implementation

1. Shake the bottle before using it.
2. IMPERPLAST ECO can be applied by brush, spray, and by immersion.
3. The emulsion, placed by brush or spray, will be used pure, undiluted. The surfaces must be impregnated at once, uniformly and extensively, until saturation.
   One coat is sufficient.

Drying time

1. Depends on atmospheric conditions and the nature of the support.
2. After several rain showers, the surface repels water and the beading is visible.
3. In general, it varies between 12 and 24 hours.
4. If the processing instructions are followed carefully, a smooth surface will clean itself.
   A smooth surface will rinse itself.

Consumption :

Depending on the structure of the surface and the nature of the support: 0.25 L to 1 L/m²

Sustainability :

Depending on the type of surface and exposure conditions: 4 to 10 years

Conditioning :

5 L and 10 L.