SikaFloor-01 Primer - Dispersion primer before levelling compound - Sika

SikaFloor-01 Primer - Dispersion primer before levelling compound - Sika

Sikafloor-01 Primer is a concentrated solution based on a synthetic resin , mono-component and in aqueous phase, which is diluted with water and used as a primer on cement -based supports, wood and mastic asphalt.
It is applied before the use of leveling mortars and adhesive mortars for tiles , mainly to reduce the absorption of the support and increase the adhesion to the support.

Features

• Low consumption / high covering power
• Compatible with underfloor heating
• Short waiting times
• Reduces media dusting
• Compatible with specific media
• Very low emission
• Applicable by brush, roller or spray
• Can be diluted with water
• Ready to use
• Solvent-free according to TRGS 610

Application areas

As a primer for:

• Reduce support absorption
• Increase grip on smooth, sound surfaces
• Protect the substrate against humidity due to leveling mortar or tile adhesive mortars

Application

1. Strictly follow the installation procedures as defined in the job descriptions, application guides and work instructions, but which must always be adapted to the actual situation on site.
2. Apply the primer to the prepared substrate by roller, brush or spray (mixing ratio at least 1:1).
3. Ensure a continuous, well-covering layer, without pinholes, over the entire surface of the substrate.
   On very absorbent substrates, it may be necessary to apply a second coat of primer.
4. Avoid puddles of primer.
5. Make sure that the waiting time is respected before applying the following products.

Consumption

~70gsm
This figure is theoretical and does not take into account additional material due to the porosity and roughness of the surface, the differences in levels or the loss of material during the works, etc.

Conditioning

1 kg 5 kg and 10 kg: Blue.