Colour Bond - Pre-colored glue - Akemi
Pre-colored glue in the form of a 2-component gel , based on epoxy-acrylate in different colors, high adhesion strength, surface drying and ability to be processed very quickly, food approved.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
6 | 7 % | €46.09 |
Colour Bond - Pre-colored glue - Akemi
Pre-colored glue in the form of a 2-component (10:1) gel , based on epoxy-acrylate in different colours, high adhesion strength, surface drying and ability to be processed very quickly, food approved (approved by an external German research center).
Features :
- Very good workability thanks to its soft and slightly gelatinous consistency, does not form filaments
- Very fast hardening (15 to 40 minutes)
- Very good surface drying
- Very good polishing ability
- Easy dosing and mixing thanks to the cartridge system
- Cartridge system with 6 minute hands-on time
- Large choice of colors, more than 50 colors
- For bonding invisible joints of a multitude of composites
- Improved protection against yellowing
- Adhesion and improved adhesive strength, also on Techno ceramics
- Very good adhesion to quartz composites as well as natural and artificial stone, also at high temperatures (60-70°C, at low loading up to 100-110°C)
- The food-approved product therefore presents no danger after its installation, approved by an external German research center with a VOC content according to ASTM D2369: 12 g/L; determined by an external research centre; meets LEED v4 EQc2 SCAQMD Rule 1168 for multi-purpose construction adhesives
Areas of use:
For the fast, simple and safe production of invisible adhesive joints for cast stone and natural stone. More than 50 colors coincide with the Akemi Composil sealant (the same color codes), specially designed for extension and connection joints of reconstituted stones (Akemi Color Matching System).
Use :
- The bottom to be treated must be clean, completely dry and roughened.
- Remove the cap from the cartridge, place it in the appropriate gun, operate the handle until material comes out of the two openings, if necessary screw on a mixing nozzle.
- If you use it without a mixing nozzle, the two components must be well mixed.
- The mixture can be used for about 5 to 7 minutes at 20°C.
- After about 20 to 30 minutes (at 20°C), the hardened product can be worked (sanding, milling, drilling).
- Heat accelerates and cold slows hardening.
- Work devices can be cleaned with AKEMI Nitro Thinner.
Conditioning :
250ml
Colors:
Color assignment tables (colour charts) for cast stones from all well-known manufacturers (e.g. Silstone, Caesarstone, Zodiaq, Technistone, Quarella, Cambria, Okite, Compac, Diresco, Hanstone etc.) can be found under www.akemi.com/ColourCharts
Data sheet
- Signal word
- DANGER
WARNING - Hazard statements
- H226 – Flammable liquid and vapour
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs.
H410 – Very toxic to aquatic life with long lasting effects.
H412 – Harmful to aquatic life with long lasting effects. - Hazard pictogram
-
GHS02 - Flammable
GHS07 - Harmful
GHS08 - Health hazard
GHS09 - Environmental hazard
Specific References