Akepox 3015 Rapid Bond - Fast glue - Akemi

2-component adhesive with rapid hardening and loading, liquid, in cartridge , exact dosage and homogeneous mixing.

Packaging:
€67.68Tax Included

Volume discounts

QuantityYou SaveUnit price
127 %€62.94
AKE 10798
4004208107987

Akepox 3015 Rapid Bond - Fast glue - Akemi

2-component adhesive with rapid hardening and loading, liquid, in cartridge , exact dosage and homogeneous mixing.
Excellent adhesion on contact, particularly on metal and siliceous natural stone .

Very suitable for linings, assembly work and for bonding profiles thanks to its high initial strength.
The 2-component cartridges guarantee easy, secure and clean work. An exact and homogeneous mixture.

Features :

  • Possible solicitation quickly thanks to its great initial solidity
  • Very fast hardening
  • Mix ratio 1:1
  • Easy dosing and mixing thanks to the cartridge system
  • Extremely low shrinkage during curing, which means minimal stresses in the adhesive layer
  • High elasticity and resistance of the glue layer
  • Very good stability to alkalis, therefore perfectly suitable for bonding with concrete
  • Excellently suited for bonding gas-permeable materials, as the product is solvent-free
  • Good electrical insulating effect
  • Suitable for bonding solvent-sensitive materials (e.g. Styrofoam, ABS)
  • Good adhesion on slightly damp stone
  • Limited resistance of sizing to outdoor weathering
  • The product does not tend to crystallize, which allows it to be stored without problems and gives it good processing safety.

Use :

  1. Thoroughly clean the surfaces to be bonded and roughen them.
  2. Remove the cap from the cartridge, insert the cartridge into the gun, operate the handle until material comes out of both openings, if necessary, attach a mixing nozzle.
  3. If you use it without a mixing nozzle, the two components must be well mixed.
  4. The mixture can be used for about 3 to 5 minutes (20°C).
    After approx. 20 to 40 minutes (20°C), the adhesive reaches a very high initial strength, after approx. 2 to 4 hours (20°C), gluing can be requested.
    Maximum strength after 7 days.
  5. Tools can be cleaned with AKEMI Cellulose Lacquer Thinner.
  6. Heat accelerates and cold retards the hardening reaction.
  7. Can be used for at least 1 year when stored in a cool place.

Conditioning :

395ml cartridge

Akemi
AKE 10798

Data sheet

Signal word
DANGER
WARNING
Hazard statements
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H318 – Causes serious eye damage.
H319 – Causes serious eye irritation.
H411 – Toxic to aquatic life with long lasting effects.
H412 – Harmful to aquatic life with long lasting effects.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
Hazard pictogram : GHS09 - Environmental hazard GHS09 - Environmental hazard
 

Specific References

EAN13
4004208107987

You might also like