Stripgel - Paint and varnish remover - Zep Industries

Stripgel - Paint and varnish remover - Zep Industries

Stripping of common paints and graffiti on all surfaces which removes several layers of paint in one go, even very old ones.

Apply by simple coating.
Without flash point according to standard NF EN 22719.

Properties :

• Excellent penetration into the joint.
• Apply by simple coating.
• Rinses very easily with water.
• No attack on light alloys.
• Solvent used to dissolve rubber and plastics.
• Can be used on vertical walls thanks to its presentation in gel form.

Manual :

1. Using a brush, apply pure Stripgel to the surface to be stripped, leave to act for 15 to 20 minutes.
2. Use a spatula to remove the glue or rinse with pressurized water.
3. For better rinsing, use a presser.
   In a bath: immerse the pieces using a basket in a tank (preferably stainless steel) of pure product.
4. Leave to act for 10 minutes, take out the basket and rinse with pressurized water.
5. To obtain a good rinse, use a presser.
6. Note: when the temperature is below 15°C, it is recommended to shake the barrel well before use.

Conditioning :

33kg.