Procolle pistol solv - PU foam cleaning solvent - Zep Industries

Procolle pistol solv - PU foam cleaning solvent - Zep Industries

Polyurethane foam cleaning solvent used for cleaning guns and removing PU foam splashes.

Properties :

• Effective : Spray solvent suitable for cleaning PU foams such as PROCOLLE PISTOL PU.
• Resolution capacity : Perfectly dissolves fresh polyurethane foam, traces of adhesives, grease, paints, etc.
• Effectiveness : Cleans all external parts and the internal mechanism of the guns.
• Practical to use : Can be used in all positions.

Manual :

Cleaning PU splashes:

1. Remove the lid, put the black pusher on the aerosol valve.
2. Press gently, directing the spray towards the parts to be cleaned.
3. Remove dissolved foam by wiping.

Cleaning the foam gun:

1. Cleaning the internal part of the gun: remove the black pusher and screw the aerosol onto the gun adapter.
2. Depress the gun trigger so that the solvent enters the gun body, release the trigger and wait approximately 2 minutes so that the solvent can dissolve the residue.
3. Press again and empty the gun into a container.
4. Repeat 2 or 3 times, until a clear liquid comes out of the gun.
5. After cleaning the gun, it is imperative to remove the aerosol.

Conditioning :

0.5 L - Aerosol.