Anti-Condensation - Protection of walls against humidity - Aquaplan

Anti-Condensation - Protection of walls against humidity - Aquaplan

Decorative and insulating coating for walls and ceilings.

Permanently prevents moisture and mold due to condensation.
Cold bridges caused by insufficient or incorrectly installed insulation lead to the formation of condensation.

If, in addition, the ventilation is poor, stubborn mold develops.
Thanks to the thermo-insulating properties of Anti-Condensation , the treated surface is remarkably warmer than before to the touch, which prevents the formation of mold.

Benefits :

• Isolated
• Does not contain solvents
• Permanently prevents mold
• Environmentally friendly and safe to use
• Effective and permanent
• Yield: Approximately 1 L per 6 m² per coat.

Application :

Can be used on surfaces made of the most common building materials such as brick, plastering, wood, etc.

Useful information:

• Store in a cool place (max. 20°C) and protected from frost.
• Do not apply if the temperature of the substrate or the ambient temperature is below +5°C.
• Mix well before use and do not dilute the product.
• Not suitable for combating rising damp and/or moisture contained in walls.
• Can be colored with universal pigments (max. 3%) or overcoated with quality vapour-permeable paint.
• Clean the equipment with water immediately after completion of the work

Manual :

1. Dust and degrease the support first.
   Remove any mold intensively with a stiff brush and water.
2. Fix and saturate strongly absorbent substrates such as new plaster and plasterboard with a coat of water-based wall paint.
3. Apply a coat of ANTI-CONDENSATION undiluted with a roller or brush at a rate of approx. 0.16 l/m²/coat.
4. Apply a 2nd coat undiluted after approx. 4 hours for a better insulating effect.
   Determine the desired aesthetic design using a smooth or coarse or special relief roller.
   The surface can also be wallpapered after 24 hours.
5. Then go for the smoothest finish.

Conditioning :

• 2.5L and 5L.