Anti-Wet Walls - Waterproof coating against moisture - Aquaplan

Anti-Wet Walls - Waterproof coating against moisture - Aquaplan

Breathable and transparent coating , for an effective treatment of damp unburied interior walls , before painting or wallpapering.

After drying, the product forms a colorless barrier impermeable to the passage of humidity and thus prevents the appearance of damp spots , the formation of mould , the peeling of the wallpaper and the peeling of the paint.
Thanks to its special composition, the product penetrates deep into the pores and can be applied on dry or damp substrates.

Benefits :

• Permanent result
• Also adheres to damp substrates
• Apply before painting or wallpapering
• Environmentally friendly and vapor permeable
• You need about 1 L per 4 m² per coat.

Application :

Can be used on most interior walls such as ceiling, brick, concrete, etc.

Manual :

1. Dust and degrease the support.
2. Remove old layers of paint and/or old wallpaper.
3. Apply min. 2 coats of ANTI-DAMP WALLS using a brush or roller at a rate of 0.25 to 0.30 l/m²/coat with an interval of approx. 3 a.m.
   Can be applied on a slightly damp support.
   Walls that are too damp or soaked should be dried first.
4. Apply a 3rd coat to highly absorbent substrates and/or problem areas.
5. Continue to finish the interior wall after approx. 24 hours using wallpaper or water-based or solvent-based paint.

Conditioning :

• 0.75L and 2.5L.
• White/Transparent after drying.