Rapid impregnator - Treatment product - Akemi

Rapid impregnator - Treatment product - Akemi

Impregnation based on organic and organosilicon active ingredients .
For the treatment against water and dirt of natural and artificial stone with a polished , honed and rough surface .

• Very rapid appearance of the protective effect with a very strong beading effect.
• Ideal for facades, monuments and tombstones.

Features :

• Solvent based
• Hydrophobic
• Transparent

Use :

1. Apply the product undiluted to a dry, clean surface, thinly and evenly.
2. Leave on for 15 to 20 minutes. (must not dry out, otherwise apply a 2nd coat earlier)
3. Apply a 2nd layer, so as to reabsorb the first layer. (on very absorbent substrates apply several coats wet on wet)
4. Remove excess product from the last coat after about 5 minutes with an absorbent cloth and buff the surface completely with dry, lint-free cloths.
5. Allow surface to sit for at least 6 hours before using again.

Consumption :

About 5 to 20m² with 1 litre.

Conditioning :

• 1L
• 5L