MN Polish Liquide - Liquid wax for natural stone - Lithofin
This product is a solvent-based protective wax for refreshing and polishing stone surfaces .
It protects and cares for all polished surfaces and maintains their appearance.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
2 | 3 % | €26.26 |
3 | 4 % | €25.99 |
5 | 5 % | €25.72 |
10 | 10 % | €24.36 |
MN Polish Liquide - Liquid wax for natural stone - Lithofin
Lithofin MN Polish is a special product for marble, natural and artificial stone.
It is a liquid polish that contains high quality solvents and waxes.
The use of high-quality raw materials allows the protection and qualitative maintenance of natural stone surfaces.
From the first application appears a shiny film. This shine can be enhanced with hand or machine polishing.
Lithofin MN Polish revives the colors of stone surfaces, improves their appearance, facilitates maintenance and makes them water repellent.
Technical specifications :
- Density: approx. 0.9g/cm³
- Flash point: >26°C (cc)
- pH: na
- Appearance: liquid, clear, colorless
- Smell: aromatic
- Water solubility: insoluble
Application domain :
As the first treatment for natural stone and concrete floors, window sills, tables, etc. Gives a fresh look and protects.
It can also be used to revive coatings that have become dull and dull.
Inside Lithofin MN Polish is used instead of traditional stone maintenance products containing trichlo or perchlo.
It can be used on all polished or finely polished natural stone coverings such as marble, limestone, travertine, slate, granite, etc., as well as concrete blocks, agglomerated marble.
Lithofin MN Polish is resistant to household soiling of all kinds and to salt. It is not resistant to cellulose lacquer thinner, gasoline, etc. Depending on the type of use, the effect can last several months.
Manual :
- Slightly shake the bottle before use.
- Apply a thin layer of Lithofin MN Polish evenly with a clean cloth or felt-tip pen and leave to dry.
- Then polish with a soft linen cloth or a polishing felt, by hand or by machine.
- Treat more absorbent surfaces several times in succession if necessary.
Caution: the surfaces to be treated must be perfectly dry. Do not use Lithofin MN Polish at temperatures below 15°C or above 25°C. Surfaces sensitive to solvents must be protected. Lithofin MN Polish is only suitable for interior use. To obtain a good result the surfaces must be polished and smooth. Remove rough parts with 000 steel wool or with a nylon abrasive disc.
Lithofin MN Polish can be removed with Lithofin MN Multi-Cleanser or, in difficult cases, with Lithofin LÖSEFIX .
Yield :
- approx. 10 to 20 m²/l depending on the surface.
Data sheet
- Signal word
- DANGER
- Hazard statements
- H226 – Flammable liquid and vapour
H304 – May be fatal if swallowed and enters airways.
H312 + H332 – Harmful in contact with skin or if inhaled.
H315 – Causes skin irritation.
H373 – May cause damage to organs. - Hazard pictogram
-
GHS02 - FlammableGHS07 - HarmfulGHS08 - Health hazard
Specific References
- EAN13
- 4001524016917