Solid - Protective glaze with UV filter - Linitop

Solid - Protective glaze with UV filter - Linitop

Linitop Solid is a protective stain with a new generation UV filter containing a UV absorber coupled with a stabilizer.

“High performance” decorative stain for exterior wood with few dimensional variations.

Properties :

• Has a new generation UV filter, UV absorber coupled with a stabilizer (anti-UV barrier).
• Gelled formula and extra flexible film to limit the risk of flaking.
• Special anti-UV pigmentation for optimal protection.

Destination :

Vertical surfaces.
Protects and decorates cladding, chalets, fences, balustrades, etc. except Red Cedar and species containing an anti-oxidant (e.g. Iroko, etc.).

Avoid woods rich in resins.
Can also be applied indoors: doors, windows, frames, beams, paneling, etc.

Features :

• Composition : Alkyd urethane resins
• Finish : Matte-satin
• Use : Outdoor
• Yield : 12 to 15 m² per liter and per layer depending on condition and porosity of the support and method of application
• Application equipment : Brush, roller, gun
• Drying :
  
  • Dust free: 4 hours
  • Recoverable: 24 hours
• Cleaning tools : White spirit
• Shelf life : 2 years minimum in original, unopened closed packaging

Manual :

1. Always plan for the quantity needed to be sure to complete the work.
2. On a prepared surface, apply 2 of LINITOP SOLID.
   Think carefully about the grooves and ends.
3. Application with a roller (microfiber or special acrylic <12 mm preferably) apply in the natural direction of the support (direction of the wood fibers, etc.).
   Do not overload.
4. Wait 24 hours between coats.
5. When applying with a spray gun, provide smoothing to avoid any possible dripping and promote penetration of the product.
6. Always finish at the level of a blade or a natural break such as a door or window.
7. It is advisable to work from top to bottom.

Conditioning :

0.5L, 1L and 2.5L.

Finishes: