ATM Pro - Preventive and curative anti-greening - Concentrate to dilute - No BE - Owatrol
Destroys and eliminates greens, red and yellow algae, lichens, mold, fungi, etc.
This product is banned in Belgium!
OWA ELATM1
3285820033798
ATM Pro - Preventive and curative anti-greenings - Concentrate to dilute - No BE - Owatrol
ATM Pro destroys and eliminates greenery , red and yellow algae , lichens , molds , fungi ...
Properties :
- ATM Pro is composed of two active agents which give it double effectiveness on the surface and in depth:
-
- Quaternary ammonium: Kills surface microorganisms that need light to grow.
- Isothiazolinone (OIT): Acts more deeply and eliminates micro-organisms in micro-cavities. Little washed away by rainwater, it considerably delays their reappearance (residual effect).
- ATM Pro spreads very easily thanks to surfactants.
- Acts by encapsulation which deprives the micro-organisms of all oxygen in order to eliminate them within 4 to 6 days if it does not rain.
- Also destroys germs and roots embedded in the support.
- Without rinsing unless painted.
- In a few days, restores the supports to their natural appearance without altering or staining them.
- Can also be used before painting.
- No impact on paints or non-ferrous metals (galva, zinc).
- Without bleach or acid: no risk of bleaching the support.
- 96% biodegradable product*.
- Apply from March to October for best results.
- The yield will vary depending on the contamination and the nature of the support:
- Light contamination or preventive treatment: ± 5 m² per litre.
- Significant contamination: ± 3 m² per litre.
Application :
- Application temperature: between 10 and 25°C.
- Do not apply in direct sunlight, on a frozen substrate, in rainy or humid weather (plan for a minimum period of 48 hours without precipitation after carrying out the treatment), in strong winds.
- Proceed with the following dilution of ATM PRO (to be multiplied by 5 for the 5L): - Preventive action: 1 L + 49 L of water.
- Can treat up to 250 m². - Light curative action: 1 L + 29 L of water.
Can treat up to 150 m². - Normal curative action: 1 L + 14 L of water.
Can treat from 45 up to 75 m². - Intense/reinforced curative action: 1 L + 9 L of water.
Can treat up to 30 m². (See “yield”). - On a prepared support, apply a generous spraying or brushing pass in order to thoroughly impregnate the surface to be treated.
- Lichens, yellow and red algae may require a double application (wait 2 or 3 days).
- Before any painting work, rinse the support carefully (wait 3 days before rinsing for a preventive treatment and 6 days minimum for a curative treatment), otherwise the dead micro-organisms could harm the grip.
Greenery must be completely destroyed before painting. - During treatment, avoid runoff into streams, ponds, wells, ponds...
Do not use runoff water. - Close the container tightly after use.
destination:
- Common outdoor, vertical and horizontal surfaces: roofs, facades, walls, floors, walkways, terraces, stairs...
- New or old traditional materials: tiles, slates, asbestos cement, cobblestones, shingles, thatch, bricks, stones, plaster, painted substrates, breeze blocks, coatings, tiling, asphalt, interlocking cobblestones, non-ferrous metals (galva, zinc), paints, etc. .
Conditioning :
1L and 5L.
OWA ELATM1
2 Items
Data sheet
- Signal word
- DANGER
- Hazard statements
- H302 – Harmful if swallowed.
H314 – Causes severe skin burns and eye damage.
H335 – May cause respiratory irritation.
H410 – Very toxic to aquatic life with long lasting effects. - Hazard pictogram
-
GHS05 - CorrosiveGHS07 - HarmfulGHS09 - Environmental hazard
Specific References
- EAN13
- 3285820033798
You might also like
Customers who bought this product also bought:
(5/5) out of 4 total ratings
€11.95€12.19
€14.92€15.23