Soudabond 250 Super Tack - Contact adhesive - Soudal

Soudabond 250 Super Tack - Contact adhesive - Soudal

Soudabond 250 Super Tack is a two-sided fast contact adhesive based on synthetic rubbers in an aerosol.
The ideal adhesive for soft and flexible insulation, vapor barriers, foils and many other materials.

Features :

• Short scrub time
• Good initial bond strength
• Quick recovery
• For temporary or permanent bonding
• Long open time
• Resists moisture
• Maintenance free
• Suitable for gluing polystyrene
• Good adhesion to many materials
• Does not contain chloride, toluene or methylene
• Easy to use

Applications:

• For the double gluing of flat and close-fitting materials.
• Temporary or permanent bonding of soft and semi-rigid insulation materials, including rock wool, technical insulation and synthetic foam rubber.
• Bonding of vapor barriers, plastic films and building films, geotextiles, felts and other protective layers.
• Suitable for bonding sound insulation materials.
• Bonding of EPS and XPS polystyrene

Manual :

• Shake the aerosol well before use.
• During application, keep the aerosol upright and keep pressing on the head.
• Spray from a distance of approximately 5 to 10 cm.
• Apply the glue evenly on both surfaces to be glued.
• Spray the glue, in a band, on the surface.
• It is advisable to make a second pass on half of each strip of glue so that the entire surface is covered with 2 layers.
• Two light coats (with overlap) give better results than one heavy coat.
• Wait at least 5 minutes (at 23°C and 50% RH) and close the glue.
• Press firmly.
  It is the power and not the duration of compression that determines the final force.
• After use, turn the aerosol upside down and squeeze the head until only the propellant escapes.
  This prevents the aerosol from becoming clogged with the product.

Conditioning :

• 500ml aerosol