FILAPW10 - Protector against the rise of salts and pollutants - Fila

FILAPW10 - Protector against the rise of salts and pollutants - Fila

• A protector against the rise of the salts to be applied on the back of tiles or slabs absorbent materials for laying.
• Prevents the ascent of pollutants from the substrate to the surface of the material (salts, tannin, ferrous substances, etc.) avoiding the formation of halos and tasks.
• Protector to be applied before installation
• Specific product for natural stone, granite, marble, wallboard, terracotta and absorbent materials.

Benefits: 

• Blocking the rise of polluting agents and prevents superficial task and halos.
• It does not create a superficial film and let sweat the treated material.
• Does not change the characteristics of adhesion of the adhesive and the seal (standard UNITED IN 1348-2009 AND ASTM C482-02 R-2009)
• VOCs-free water - based product.
• Final protection.
• Ideal for floors, stairs and coatings.

Packaging: Available in 5 litres of product.

Performance: 1 litre of product will cover 10-15 m².

Application: 

Product ready to use, no dilution required.

Clean the back of the tile or slab by eliminating dust and residue. When the surface is dry, apply the product on the back and on the edge of the material using a brush in a continuous and homogeneous avoiding that the product is stagnating. Let dry for about 24 hours before gluing the floor by storing the plates back to back. RESERVED for professional use: on a vertical surface, apply a spray (Airless) by dosing the product to distribute and system using PPE appropriate, as stated in the safety data sheet.

Attention: In case of shiny surfaces, pay special attention to the method of application in order to avoid putting the product on the surface and stain. Do not apply the product on the surface of the material if the surface is glossy.