Aerorust - Anti-rust protective gloss coating - Zep Industries

Aerorust - Anti-rust protective gloss coating - Zep Industries

Offers both long-lasting anti-corrosion protection and a high-coverage paint finish.
Applicable directly to any rusty surface.

Penetrates quickly into rust.
Long-lasting protection : more than 1000 hours of salt spray test successfully passed.

Properties :

• “2 in 1”: Aerorust offers both durable anti-corrosion protection and a high-coverage finishing paint.
• Applicable directly to any rusty surface.
• Apply without primer.
• Penetrates quickly into rust: remarkable wetting of the support.
• Long-lasting protection: more than 1000 hours of salt spray test successfully passed.
• Uses the VCI technique, the cutting-edge technology of vapor phase corrosion inhibitors, developed to meet the extreme requirements of aeronautics and aerospace.
• Resists weather, gasoline and various emissions.
• High resistance to temperature differences.
• Impeccable appearance of painted surfaces.
  Very high shine color.
• Low in solvent: Low odor and respectful of nature.
• Can be used indoors and outdoors.
  Without chlorinated solvents.

Applications:

VCI: Particles pre-charged with electricity and special resins containing antioxidant pigments are deposited like a protective film on rust.
In addition, the presence of water-repellent additives prevents the penetration of moisture or aggressive substances.
Anti-corrosion coating and finishing paint, used on oxidized or not iron, steel, copper, brass, aluminum, on old synthetic paints, on wood, glass, stone.

Manual :

1. In all cases degrease, rinse and dry the support.
   On a rusty surface, remove the mobile rust using a wire brush.
2. Apply preferably between 15 and 25°C.
3. Shake the aerosol well before application.
4. Spray from a distance of 25 cm on the support to be protected.
5. Make at least 2 crossed passages.
6. After spraying, purge the valve by inverting the aerosol, spraying until only gas escapes.
7. It is advisable to lightly sand bare, smooth metal surfaces.
8. Cleaner before drying: water.

Conditioning :

400 ml: Black, Blue, Green, Grey, Red, White and Yellow.