Reveblak 9 - High temperature black coating - Zep Industries

Reveblak 9 - High temperature black coating - Zep Industries

High temperature black coating to protect all metal parts subjected to temperatures of 650°C peak and 600°C continuous.
Excellent matt black appearance and is ideal for boilers, fireplaces, exhausts and motorcycles.

Properties :

• Gives a very nice tension.
• Excellent matte black appearance.
• Fast drying.
• The aerosol allows for easy application.
• Used as a coating for pipes, boiler bodies, chimney bodies, car and moped exhausts, etc.
• Protects all metal parts subjected to high temperatures.
• Very good resistance to gasoline, water and bad weather after curing.
• Excellent adhesion to bare metal.

Applications:

Maintenance services, plumbers, heating engineers, mechanics, recreational tillers, etc.

Manual :

1. In all cases, apply to a rust-free, degreased and dry surface.
2. Shake the aerosol vigorously before use and occasionally during application.
3. Spray evenly from a distance of 25/30 cm over the entire surface, holding the aerosol vertically.
   For effective protection, it is best to apply Reveblak 9 in several thin coats rather than a single thick coat; wait a few minutes between applying each coat.
   For optimum adhesion and hardening, allow the support to dry at room temperature for approximately 1 hour, then heat for 30 to 50 minutes at a temperature of 250°C to 300°C.
4. After use, turn the aerosol over and press the valve for a few moments to prevent it from blocking.

Conditioning :

0.5 L aerosol.