SikaTop-111 - Waterproof and anti-wear self-levelling mortar - Sika

High-performance, pre-dosed hydraulic mortar for new and repair work on floors, and for casing.

1 Item
€137.64Tax Included

Volume discounts

QuantityYou SaveUnit price
32 %€134.89
105 %€130.76
207 %€128.01
3612 %€121.12
SIK 400332
3240240001864

SikaTop-111 - Waterproof and anti-wear self-levelling mortar - Sika

High performance pre-dosed hydraulic mortar for new work and repairs in the ground , and for casing.

Pre-dosed micro-mortar comprising:

  • component A (emulsion resin)
  • component B (cement and special fillers)

After mixing, a gray colored mortar is obtained.

Features

  • Can be brought into contact with drinking water (France).
  • Impermeable to water under pressure or against pressure.
  • Easy and quick to apply (self-leveling mortar).
  • Hardens quickly.
  • Excellent mechanical resistance.
  • Excellent adhesion to most substrates (concrete, mortar, stone, brick...).
  • Unaffected by freeze/thaw cycles and de-icing salts.

Application domain

SikaTop-111 is used as a waterproofing coating to seal concrete slabs in structures such as:

  • Buried premises (casing).
  • Reservoirs, basins, …
  • Skating rinks.
  • Cold rooms.

Application

  1. The support must be clean, healthy and free of non-adherent parts.
    In particular, it must be free of traces of oil, grease, laitance, curing product, old coatings and any substance likely to affect the adhesion of the mortar.
  2. The day before the implementation, moisten the support to refusal.
  3. At the time of application it will be moistened again.
  4. However, ensure that it is not dripping and free of any film or puddle of water on the surface.
  5. Pour all of component A (emulsion resin) into a clean, wide-mouth container (bucket, full-mouth canister).
  6. Gradually add all of component B (powder) while mixing with an electric or pneumatic stirrer at low rotation speed (approximately 300 rpm) for 2 to 3 minutes until a thixotropic and homogeneous mortar of uniform color.
  7. Only waste the number of kits needed for immediate application.
  8. Spread the mortar on the floor and spread it with the squeegee adjusted to the desired thickness.

Consumption

The actual consumption depends on the irregularities of the support:
~ 2.2 kg/m² and mm thick

Conditioning

Kit A+B of 37.5 kg

Sika
SIK 400332
1 Item

Data sheet

Signal word
DANGER
WARNING
Hazard statements
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H318 – Causes serious eye damage.
H335 – May cause respiratory irritation.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
 

Specific References

EAN13
3240240001864

Download

fact sheet-tech-sikatop-111

Sikatop-111 product data sheet

Download (65.47KB)

record-dry-sikatop-111

Sikatop-111 product safety data sheet

Download (707.18KB)

You might also like

Customers who bought this product also bought: