SikaFloor Level-30 - Self-leveling mortar EC 1 PLUS - 4 to 30 mm - Sika

SikaFloor Level-30 - Self-leveling mortar EC 1 PLUS - 4 to 30 mm - Sika

High-performance , self-leveling , cement-based, fast-drying leveling mortar for interior and exterior use , layer thickness 4-30 mm.
EC 1 PLUS label: very low VOC emissions .

Features

• Self-flowing, very fluid
• Easy to install by pumping or manual application
• Ready to use
• Low shrinkage
• Maintaining good implementation capability and fluidity throughout the entire period of use
• Quick setting and drying
• It is possible to walk on the screed after 3-4 hours (+20 °C)
• Aesthetically pleasing and hard surface
• EC1 PLUS label: very low VOC emissions
• Excellent freeze/thaw resistance in the presence of de-icing salts (R3)
• Casein and formaldehyde free
• Suitable for use with underfloor heating systems

Areas of application

Sikafloor Level-30 is a self-flowing floor leveling mortar that allows you to level or smooth concrete screeds and floors in one operation with a thickness of 4 to 30 mm.
Sikafloor Level-30 can be used as a leveling mortar in an industrial environment when coated with a polyurethane or epoxy resin-based topcoat intended for medium to heavy loads (heavy traffic, forklifts with pallets).

Sikafloor Level-30 is suitable for smoothing, leveling and smoothing the floor under parquet, ceramic tiles, seamless synthetic resin floors, carpets and elastic floor finishes.
Sikafloor Level-30 can be used as a leveling layer for outdoor applications, if this layer is covered with a final waterproof layer.

• Suitable for concrete repair work (principle 3, method 3.1 according to EN 1504-9).
• Suitable for structural reinforcement (principle 4, method 4.4 according to EN 1504-9).
• Suitable for maintaining or restoring passivity around the frame (principle 7, methods 7.1 and 7.2 according to standard EN 1504-9).

Application

1. Pour the mixed mortar onto the primed surface and spread the product with a trowel or comb until the desired thickness is achieved.
2. Carefully pass over the debubbling roller in a crisscross pattern to avoid air entrapment.
   It is recommended to work with falling temperatures.

Consumption

~ 1.8 kg/m2/mm

Packaging

25 kg bags

FAQ - Frequently Asked Questions

1. Can I use SikaFloor Level-30 outdoors?
   No, it is only for interior applications. For exterior use, specific Sika mortars must be used.
2. Can it be used as a finish?
   Yes, it can be used as a wear surface in light industrial flooring. For a decorative finish, apply an epoxy or PU resin.
3. Can I apply it over existing tiles?
   Yes, but the tiles must be well-adhered, degreased, lightly sanded, and then primed with a Sika primer.
4. Is it compatible with underfloor heating?
   Yes, fully compatible with hydraulic underfloor heating, electric underfloor heating (low temperature).
5. Can you walk on it quickly?
   Yes, 2 to 3 hours depending on temperature and humidity.
6. What is the maximum thickness for a single layer?
   Up to 30 mm in one pass.
7. Is it suitable for pumping in large areas?
   Yes, SikaFloor Level-30 is specifically designed for pumping.
8. Is it classified as low emission?
   Yes, EC1 PLUS certification, guaranteeing a healthy environment.
9. Can it be used on an anhydrite screed?
   Yes, but it is imperative to sand off the laitance, remove the dust, and apply a suitable Sika primer.
10. Can you cover the leveling compound with parquet flooring?
    Yes, after 2 to 4 hours, once the leveling compound is sufficiently dry.