SikaBond-52 Parquet i-Cure - Elastic Parquet Adhesive - Sika
(5/5) out of 2 total ratings
SikaBond-52 Parquet is an elastic, single-component, solvent-free parquet adhesive designed for application with Sikabond Dispenser spreaders or beads.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
10 | 5 % | €16.83 |
20 | 7 % | €16.47 |
60 | 10 % | €15.94 |
SIK 424419
SikaBond-52 Parquet i-Cure - Elastic Parquet Adhesive - Sika
SikaBond-52 Parquet is an elastic, single-component, solvent-free glue for parquet , designed for application with Sikabond Dispenser spreaders or by cords.
Features
- Glue can be sanded
- Parquet can be sanded after 12 hours
- Sound-absorbing elastic glue that dampens footsteps
- Suitable for bonding parquet directly to existing ceramic tiles
- Suitable for underfloor heating
- Very low VOC emissions
- Reduces tension on the substrate and absorbs longitudinal tension between parquet and substrate
Application areas
- Designed for full bath bonding using SikaBond Dispenser spreaders:
Solid and prefabricated parquet, mosaic parquet, industrial parquet, chipboard panels and wood for the substructure. - Designed for the Sika AcouBond system and bead bonding:
Solid or multilayer parquet, chipboard and wood for the substructure. - SikaBond-52 Parquet is specially designed for use with difficult woods.
Application
- The support must be clean, dry and homogeneous, free of oil, grease, dust and loose parts.
Paints, laitance and other loose parts must be removed. - Concrete floors and/or cementitious screeds must be sanded and carefully cleaned using an industrial vacuum cleaner.
- Anhydrite screeds/floors should be sanded and thoroughly cleaned with an industrial vacuum cleaner shortly before work begins.
- Broadcast mastic asphalt floors must be primed prior to the application of Sika Primer MR Fast (see Technical Data Sheet).
- Enamelled ceramics and old ceramic tiles must be degreased and cleaned beforehand with Sika Aktivator-205, or the surface of the tiles must be followed by careful cleaning using an industrial vacuum cleaner.
- Glue and/or screw the wooden/plaster panels to the substructure so that they are fixed to the support.
In the case of a floating or detached floor, consult Sika Technical Service. - SikaBond-52 Parquet can be used without primer on cement-based floors, anhydrite floors, chipboard, concrete and ceramic tiles.
- Use Sika Primer MR Fast on sprinkled mastic asphalt floors, cement-based floors with too high a residual moisture content, and in the case of renovation on adhesive residues and on weak, non-bearing substrates.
Consumption
Sika AcouBond System:
- ∼400–500 ml/m2 approx for SikaLayer-03 and ∼500–600 ml/m2 approx for SikaLayer-05.
- Filling of all cutouts is required.
- Use a triangular tip with an opening of 8 x 10 mm.
Full bath bonding using SikaBond Dispenser-1800 /-3600 /-5400:
- For full bath bonding using the SikaBond Dispenser, refer to the document Method of application of the SikaBond Dispenser series
Bonding to the cord:
- ∼44 ml per running meter = 250-500 g/m², depending on the spacing between the beads (solid parquet, chipboard and multi-layer parquet).
Supports treated with Sika Primer MR Fast generate less consumption of SikaBond-52 Parquet glue.
Conditioning
- Pocket of 600
- 1800ml bag
- 13 kg metal bucket.
SIK 424419
224 Items
Data sheet
- Signal word
- As of Q3 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard statements
- As of Q3 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard pictogram
Specific References
You might also like
€18.81€19.80
(5/5) out of 1 total ratings
€13.63€13.91
€52.41€53.48
Customers who bought this product also bought:
(5/5) out of 7 total ratings
€11.04
€41.06
(5/5) out of 1 total ratings
€14.60