68A Parquet glue - Parquet glue - Soudal

68A Colle parquet - Colle pour parquet - Soudal

Parquet glue 68A, for interior bonding of all kinds of parquet, on all porous substrates such as concrete, cement, wood, etc.

Features :

• High adhesive power
• Not suitable for tropical species
• Open time: approx. 15 mins.
• Excellent adhesion to almost all absorbent substrates.

Applications:

• For interior bonding of all kinds of parquet (mosaic, strip, ready-to-use and laminate, etc.), on all porous substrates such as concrete, cement, wood, HDF, etc.
• Not suitable for tropical species.
• Consumption 800 to 100g/m².

Manual :

• Allow the glue to come to room temperature before use.
• Apply the adhesive to the substrate using a Soudal n° 3 fine-toothed spatula.
• Do not apply more glue to the substrate than the floor area that can be laid within approximately 30 minutes.
• Lay the parquet in the glue with a sliding motion and tap with a rubber hammer.
• Ensure good transfer of the adhesive to the parquet (coverage of at least 80%).
• If necessary, ballast the installed parquet. If gluing a carpet to a wooden screed or an intermediate floor, it should also be nailed.
• After at least 48 hours, the parquet can be sanded and treated.
• In the case of a glued and nailed carpet, this must be done within a minimum of 24 hours.

Conditioning :

• 1 kg / 5 kg / 15 kg bucket