COTTO Wax-Finish - Final treatment of terracotta floors - Lithofin
This product is a sealer and protector for the final treatment of the protection of terracotta floors after treatment with Lithofin COTTO Pre-Wax .
It also allows the treatment of tiles already protected in the factory.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
2 | 3 % | €26.84 |
3 | 4 % | €26.57 |
5 | 5 % | €26.29 |
10 | 10 % | €24.90 |
COTTO Wax-Finish - Final treatment of terracotta floors - Lithofin
This water-based, ready-to-use product is composed of superior natural waxes as well as additives.
Lithofin Cotto Wax-Finish forms a film that shines by itself and protects the floor.
The product forces impurities to stay on the surface and prevents them from penetrating
Maintenance is considerably facilitated by a reduction in surface roughness.
The appearance of the coating is improved while retaining its natural light shade.
The film reduces the diffusion of water vapour, is resistant to ultraviolet rays and does not yellow.
Lithofin Cotto Wax Finish resists abrasion very well and is easy to apply.
Technical specifications :
- Density: 1.00 g/cm³
- pH: 9 to 10
- Flash point: approx. 85°C (cc)
- Appearance: whitish emulsion/dispersion
- Odor: almost none
Application domain :
Final treatment that gives a natural shine to interior flooring in Italian, Spanish, French terracotta and clay tiles etc.
Also suitable for pre-treated or waxed terracotta tiles.
For optimum protection of non-pre-treated absorbent terracotta, we recommend prior impregnation with Lithofin COTTO Pre-Wax or Lithofin Vlekstop W . In this case, the final color will be lighter.
Manual :
- Apply a copious and regular quantity of Lithofin Cotto Wax-Finish on the clean coating and with an applicator broom or sponge. You can also apply this product regularly with a garden sprayer and spread it immediately with a sponge.
- A second coat should be applied after a drying time of approximately 40-60 minutes. Avoid puddles or formation of “drops” or wipe them up immediately with diluted product.
- If the floor is very absorbent, a third coat may be necessary.
- On all pre-treated or waxed surfaces apply in thinner coats.
- Wash working instruments with water.
- Recommended temperature range for treatment: 5 to 25°
Yield :
- Approx. 5 to 10 m²/litre on soft clay tiles, Spanish and French terracotta (for two coats).
- Approx. 10 to 15 m²/litre on Florentine and Italian terracotta (for two coats).
- Approx. 10 to 20 m²/litre on pre-impregnated, pre-treated or waxed surfaces.
Data sheet
- Signal word
- As of Q2 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard statements
- As of Q2 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard pictogram
Specific References
- EAN13
- 4001524013916