SikaCeram-250 StarFix - Deformable adhesive for vitrified ceramic tiles - Sika
SikaCeram-250 StarFix is a deformable adhesive for bonding ceramic tiles.
SikaCeram-250 StarFix - Deformable adhesive for vitrified ceramic tiles - Sika
SikaCeram-250 StarFix is a deformable adhesive mortar for bonding tiles.
The product can be applied in layers up to 5 mm in thickness.
SikaCeram-250 StarFix is suitable for bonding all types of ceramic tiles on walls and floors, inside and outside , for residential and industrial surfaces, for heated floors , balconies and terraces.
Features
- Deformable.
- Extended open time.
- Frost resistant.
- Easy application.
Application areas
SikaCeram-250 StarFix is suitable for bonding the following types of tiles:
- Ceramic tiles
- Sandstone tiles
- Coarse ceramic
- Marble and other natural stones not susceptible to discoloration
SikaCeram-250 StarFix can be used on walls and floors indoors and outdoors, including on:
- Heated floors (hydraulic and electrical systems)
- Terraces
- balconies
- Old healthy ceramic tiles
- Plasterboard
Application
- SikaCeram-250 StarFix is applied with a notched trowel.
- The amount of product must be sufficient to completely coat the back side of the tiles.
- Tile should be laid over freshly applied adhesive, applying adequate pressure to ensure full and even contact with the adhesive for optimum adhesion.
- If a film forms on the surface of the glue, the layer of glue should be removed immediately with a trowel, discard this material and then apply a new layer of SikaCeram-250 StarFix glue.
- Avoid application in direct sunlight and/or in strong winds / drafts.
- SikaCeram-250 StarFix is suitable for laying absorbent and non-absorbent tiles indoors, without any limitations as to size or support.
- SikaCeram-250 StarFix is ideal for laying non-absorbent tiles outdoors, up to 10000 cm2 (eg 60 x 120 cm) on the floor, and up to 7000 cm2 (eg 80 x 80 cm) on walls, on unheated cement-based substrates.
- For laying tiles larger than 900 cm² (eg 30 x 30 cm), it is always recommended to apply the double-sided bonding technique (buttering).
Consumption
Consumption is a function of the surface profile and the roughness of the substrate, the size of the tiles and the laying technique (gluing on one side or double-sided).
As an indication, in kilograms of powder per m²:
- Small tiles/6 mm notched trowel ~ 2.1 kg/m²
- Normal tiles/notched trowel 8 mm ~ 2.6 kg/m²
- Large tiles/10 mm notched trowel ~ 3.1 kg/m²
Conditioning :
25 kg bag in White or Grey.
Data sheet
- Signal word
- DANGER
- Hazard statements
- H315 – Causes skin irritation.
H318 – Causes serious eye damage.
H335 – May cause respiratory irritation. - Hazard pictogram
-
GHS05 - CorrosiveGHS07 - Harmful
Specific References